Documentation/Engine/Units/accessory transmission data
< Documentation | Engine | Units
Jump to navigation
Jump to search
The accessory_transmission_data unit class is used to define the transmission characteristics for the player's vehicle, as well as the differential ratio. Units of this type are usually defined in /def/vehicle/truck/<make.model>/transmission/*.sii and valid unit names end in .transmission
.
Attributes
Many common attributes are inherited from accessory_data.
Name | Type | Default Value | Description |
---|---|---|---|
stall_torque_ratio | float | This defines the maximum torque multiplication of the torque converter for an automatic transmission. The torque output of the transmission is clamped to a maximum of (engine torque × gear ratio × stall_torque_ratio). That is, the output torque stops increasing once the output speed drops below (engine speed ÷ gear ratio ÷ stall_torque_ratio). If unset, the transmission behaves like a conventional transmission without a torque converter. | |
differential_ratio | float | This defines the differential/final drive ratio between the transmission output shaft and the wheels. | |
retarder | uint | 0 | The number of output levels for the retarder if applicable. If zero, retarder behavior is disabled for the transmission. |
ratios_reverse | float_array | This defines the reverse gear ratios in order of decreasing gear reduction. The values should be negative. Example:
ratios_reverse[0]: -11.002 ratios_reverse[1]: -8.875 | |
ratios_forward | float_array | This defines the forward gear ratios in order of decreasing gear reduction. The values should be positive. Example:
ratios_forward[0]: 11.32 ratios_forward[1]: 9.132 ratios_forward[2]: 7.207 ...etc... | |
transmission_names | owner_ptr | Points to a unit of the type transmission_names, usually nameless and within the same unit definition file or included from a Serialized Unit Include (.sui) type file. This is used to assign custom names to each gear in automatic and sequential modes (these are overridden by h-shifter pattern definitions). |
Raw Unit Definition
"accessory_transmission_data":{ "superclass":"accessory_data", "attrs":{ "name":{ "type": "string" }, "short_name":{ "type": "string" }, "icon":{ "type": "string" }, "info":{ "type": "string_array" }, "price":{ "type": "s64" }, "unlock":{ "type": "uint" }, "suitable_for":{ "type": "string_array" }, "conflict_with":{ "type": "string_array" }, "defaults":{ "type": "string_array" }, "require":{ "type": "token_array" }, "stall_torque_ratio":{ "type": "float" }, "differential_ratio":{ "type": "float" }, "retarder":{ "type": "uint" }, "ratios_reverse":{ "type": "float_array" }, "ratios_forward":{ "type": "float_array" }, "transmission_names":{ "type": "owner_ptr" } } },