Documentation/Engine/Units/accessory transmission data

From SCS Modding Wiki
< Documentation‎ | Engine‎ | Units
Revision as of 20:23, 12 February 2017 by Smarty (talk | contribs) (Pretty much done – just needs some default values.)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The accessory_transmission_data unit class is used to define the transmission characteristics for the player's vehicle, as well as the differential ratio. Units of this type are usually defined in /def/vehicle/truck/<make.model>/transmission/*.sii and valid unit names end in .transmission.

Attributes

Many common attributes are inherited from accessory_data.

Name Type Default Value Description
stall_torque_ratio float This defines the maximum torque multiplication of the torque converter for an automatic transmission. The torque output of the transmission is clamped to a maximum of (engine torque × gear ratio × stall_torque_ratio). That is, the output torque stops increasing once the output speed drops below (engine speed ÷ gear ratio ÷ stall_torque_ratio). If unset, the transmission behaves like a conventional transmission without a torque converter.
differential_ratio float This defines the differential/final drive ratio between the transmission output shaft and the wheels.
retarder uint 0 The number of output levels for the retarder if applicable. If zero, retarder behavior is disabled for the transmission.
ratios_reverse float_array This defines the reverse gear ratios in order of decreasing gear reduction. The values should be negative. Example:
	ratios_reverse[0]: -11.002
	ratios_reverse[1]: -8.875
ratios_forward float_array This defines the forward gear ratios in order of decreasing gear reduction. The values should be positive. Example:
	ratios_forward[0]: 11.32
	ratios_forward[1]: 9.132
	ratios_forward[2]: 7.207
	...etc...
transmission_names owner_ptr Points to a unit of the type transmission_names, usually nameless and within the same unit definition file or included from a Serialized Unit Include (.sui) type file. This is used to assign custom names to each gear in automatic and sequential modes (these are overridden by h-shifter pattern definitions).

Raw Unit Definition

  "accessory_transmission_data":{
   "superclass":"accessory_data",
   "attrs":{
    "name":{
     "type": "string"
    },
    "short_name":{
     "type": "string"
    },
    "icon":{
     "type": "string"
    },
    "info":{
     "type": "string_array"
    },
    "price":{
     "type": "s64"
    },
    "unlock":{
     "type": "uint"
    },
    "suitable_for":{
     "type": "string_array"
    },
    "conflict_with":{
     "type": "string_array"
    },
    "defaults":{
     "type": "string_array"
    },
    "require":{
     "type": "token_array"
    },
    "stall_torque_ratio":{
     "type": "float"
    },
    "differential_ratio":{
     "type": "float"
    },
    "retarder":{
     "type": "uint"
    },
    "ratios_reverse":{
     "type": "float_array"
    },
    "ratios_forward":{
     "type": "float_array"
    },
    "transmission_names":{
     "type": "owner_ptr"
    }
   }
  },