Documentation/Engine/Units/accessory paint job data

The accessory_paint_job_data unit class is used to define paint jobs for trucks and trailers (as of ETS2 1.25/ATS 1.4).

Usage

Airbrush

In the airbrush mode, the RGB of paint_job_mask is blended with the base color, using the alpha channel as the blend factor. This mode is active when the attribute airbrush is true.

Colormask

In the colormask mode, each of paint_job_mask's color channels (RGB) acts as a mask for a color being blended over the base texture. They are applied in the order blue, green, and red. So the red channel has the highest “priority”, followed by green and then blue.

TIP: Texture compression can lead to some minor aliasing at sharp boundaries between the mask channels. To avoid colors ‘bleeding through’ at these boundaries, try blending some of the lower-priority channel ‘under’ the higher-priority channel along their shared boundary. For example, at a sharp boundary between the red (255, 0, 0) and green (0, 255, 0) channels, a thin line of the base color may be visible. This can be mitigated by extending the edge of the lower-priority mask ‘under’ the higher-priority mask. So in the case where there is a sharp line between the red mask and the green mask, the green mask should be extended slightly into the area of the red mask. The resultant color looking at the RGB image would be yellow (255, 255, 0).

Attributes

Many common attributes are inherited from accessory_data.

Name	Type	Default Value	Modes	Description
mask_r_color	float3	(1, 0, 0)	colormask	Defines the default color applied to each channel of the color mask.
mask_g_color		(0, 1, 0)
mask_b_color		(0, 0, 1)
base_color	float3	(1, 1, 1)	all	Defines the default color of the paint job.
mask_r_locked	bool	true	colormask	When false, the player may change each channel's color via the color picker.
mask_g_locked		true
mask_b_locked		true
base_color_locked	bool	true	all	When false, the player may change the base color via the color picker.
flip_color_locked	bool	true	flipflake	When false, the player may change the flip color via the color picker.
flake_color_locked	bool	true	flipflake	When false, the player may change the flake color via the color picker.
flip_color	float3	(1, 0, 0)	flipflake	Defines the color of the flip effect.
flip_strength	float	0.27	flipflake	Defines the relative strength of the flip effect.
flake_color	float3	(0, 1, 0)	flipflake	Defines the color of the flake effect.
flake_uvscale	float	32.0	flipflake	Defines how many times the flake_noise texture repeats within one UV tile. (Another way to think of this is that the UV coordinates are divided by this factor when addressing flake_noise.)
flake_density	float	1.0	flipflake	Defines how 'tight' the flake effect is to the specular highlight. Higher values result in a smaller area of the flake effect, while smaller values result in a broad area having it.
flake_shininess	float	50.0	flipflake
flake_clearcoat_rolloff	float	2.2	flipflake	Adjusts the sharpness of the clearcoat specular highlight. Higher values yield sharper edges.
flake_noise	string	"/material/custom/flake_noise.tobj"	flipflake	Path to the flipflake texture. The RGB component multiplies the flake_color, and the A component masks the flake effect.
flipflake	bool	false		When true, flipflake (metallic/pearlescent) behavior and attributes are enabled. Cannot be used with colormask.
airbrush	bool	false		When true, airbrush behavior and attributes are enabled. Cannot be used with colormask.
alternate_uvset	bool	false	all	When true, the resulting material will have the altuv flavor. This triggers usage of the alternate UV layout, if configured.
stock	bool	false	all	Defaults to false. This was previously used to mark paintjobs available when purchasing a truck when true, and only available from the upgrade shop when false. Currently must be set to false to avoid undesirable behavior.
paint_job_mask	string		all	Defines the path to the texture resource (.tobj) to be used for color masking (colormask) or for blending (airbrush). If empty, mask is ignored and final result is composed purely from color attributes.
base_texture_override	string		all	Defines the path to a texture resource (.tobj) to override the base texture of the truckpaint material(s). If empty, the base texture will be used as defined in the truckpaint material(s). This is useful for overriding the alpha channel of the base texture if a different specularity is desired.