499
edits
Changes
Jump to navigation
Jump to search
→Attributes
|stall_torque_ratio
|float
|--1.0
|Torque ratio multiplier if torque converter/multiplier is present. Any positive value is used as multiplier on lower RPM torque.
|-
|0
|The number of output levels for the retarder if applicable. If zero, retarder behavior is disabled for the transmission.
|-
|auxiliary_brakes
|array<float3>
|
|When set, this overrides the retarder control so that it controls both the retarder and engine brake. The components are (retarder strength, engine brake strength, forced downshift). The value of retarder must match the number of members in auxiliary_brakes. (''Added in 1.28'') For example:
<pre> retarder: 5
auxiliary_brakes[]: (0.3, 0, 0) // 30% retarder only
auxiliary_brakes[]: (0.6, 0, 0) // 60% retarder only
auxiliary_brakes[]: (1.0, 0, 0) // 100% retarder only
auxiliary_brakes[]: (1.0, 1, 0) // 100% retarder and 100% engine brake
auxiliary_brakes[]: (1.0, 1, 1) // 100% retarder, 100% engine brake and downshift</pre>
|-
|ratios_reverse
|
|Points to a unit of the type [[Documentation/Engine/Units/transmission_names|transmission_names]], usually nameless and within the same unit definition file or [[Documentation/Engine/Units#Includes|included]] from a Serialized Unit Include (.sui) type file. This is used to assign custom names to each gear in automatic and sequential modes (these are overridden by h-shifter pattern definitions).
|-
|auto_mode_name
|string
|A
|Prefix for gear number in dashboard display (element id 1310) during automatic transmission mode. ''(Added in 1.35)''
|-
|manual_mode_name
|string
|M
|Prefix for gear number in dashboard display (element id 1310) during manual transmission mode. ''(Added in 1.35)''
|-
|crawls
|0
|The number of ratios_forward to handle as crawler gears for UI display. ''(Added in ETS2 [[Games/ETS2/Modding_guides/1.27.2#Transmission_Data|1.27.2]])''
|-
|shift_time
|float
|1.0
|The time, in seconds, it takes to shift gears in automatic shifting. ''(Added in 1.31)''
|}
