510
edits
Changes
→Attributes
|trailer_brace_up_sound
|string
|"/sound/truck/trailer_brace_up.ogg"|''For trailer usage only.'' Path to the sound to be played when retracting landing gear.''Default value changed to blank (no sound) in 1.35.''
|-
|trailer_brace_down_sound
|string
|"/sound/truck/trailer_brace_down.ogg"|''For trailer usage only.'' Path to the sound to be played when extending landing gear.''Default value changed to blank (no sound) in 1.35.''
|-
|variant
|10.0
|Nominal air brake reservoir pressure in bar. ''Added in ETS2 1.27/ATS 1.6.''
|-
|nominal_voltage
|float
|24.0
|Nominal battery voltage. ''Added in 1.36''
|-
|residual_travel
|array<float>
|
|''For trucks and trailers.'' The limit of upwards and downwards travel in meters for each axle. Each array member corresponds to an axle, from front to back (or from back to front in the case of trailers).
|-
|trailer_mass
|kerb_weight
|array<float>
|false
|''For truck usage only.'' Assigns the static weight on each axle. Each array member corresponds to an axle, from front to back.
|-
|array<bool>
|false
|''For truck and trailers.'' When true, the axle can be lifted. Each array member corresponds to an axle, from front to back (or from back to front in the case of trailers). ''Trailer functionality is added in ETS2 1.27/ATS 1.6.''
|-
|steerable_axle
|array<booltoken>
|see description
|''For truck and trailers.'' When true, the axle will be steerable. Each array member corresponds to an axle, from front to back (or from back to front in the case of trailers). By default, all wheel_f first axles on trucks are ''true'', while all others are ''false''. Possible values are:*false (non-steerable axle)*true (steerable wheels on given axle)*axle (whole axle is rotated when steering, ''axle_model'' must be correctly defined, valid only for trailers).''Added in 1.31. Value "axle" was added in 1.50''|-|steerable_lifted_axle|bool|false|''For truck and trailers.'' When true, lifted steerable axles will react to steering. Otherwise they line themselves with chassis once lifted. ''Added in 1.44.''
|-
|weight_distribution
*trailer (hook, no weight transfer)
*spreader (removes the pitch degree of freedom, typical of a spreader/booster/stinger on a lowboy configuration)
''Added in ATS 1.6.2.''|-|axle_model|array<string>||''For trailer usage only.'' Path to the axle model descriptors (.pmd). ''Added in 1.50.''|-|axle_model_collision|array<string>||''For trailer usage only.'' Path to the axle model collision descriptors (.pmc). ''Added in 1.50.''|-|extended_axle_model_shadow_texture|array<string>||''For trailer usage only.'' Texture to be used for the extended (volumetric) shadow underneath each axle. ''Added in 1.50.''|-|axle_model_steer_angle|unsigned int||''For trailer usage only.'' Overwrites the maximum steering angle of the last steerable axle model. ''Added in 1.50.''|-|cog_cargo_mass_min|float|0|Lowest cargo mass at which to offset the center of gravity. ''Added in 1.35.''|-|cog_cargo_mass_max|float|20000|Highest cargo mass at which to offset the center of gravity. ''Added in 1.35.''|-|cog_cargo_offset_min|float3|(0,0,0)|Distance to offset the center of gravity at '''cog_cargo_mass_min'''. ''Added in 1.35.''|-|cog_cargo_offset_max|float3|(0,1,0)|Distance to offset the center of gravity at '''cog_cargo_mass_max'''. ''Added in 1.35.''|-|sounds|array<string>||Each item assigns an FMOD event to a chassis function, using the "''<nowiki>sound_name|sound_path</nowiki>''" [[Games/ETS2/Modding_guides/1.39#Accessories|format]]. ''Added in 1.39'' Expected sound event names are: air_brake, air_cutoff, reverse, lift_axle, hook_attach, hook_detach, and trailer_cables.||-|lamp_setup|string||Paths to the special headlight setup if default is not good enough. ''Added in 1.40'''''Content of vehicle_lamp_setup unit is an experimental feature and will most probably change in the future!'''
|}