309
edits
Changes
Jump to navigation
Jump to search
→Attributes: Added nominal_voltage for 1.36
|trailer_brace_up_sound
|string
|"/sound/truck/trailer_brace_up.ogg"|''For trailer usage only.'' Path to the sound to be played when retracting landing gear.''Default value changed to blank (no sound) in 1.35.''
|-
|trailer_brace_down_sound
|string
|"/sound/truck/trailer_brace_down.ogg"|''For trailer usage only.'' Path to the sound to be played when extending landing gear.''Default value changed to blank (no sound) in 1.35.''
|-
|variant
|10.0
|Nominal air brake reservoir pressure in bar. ''Added in ETS2 1.27/ATS 1.6.''
|-
|nominal_voltage
|float
|24.0
|Nominal battery voltage. ''Added in 1.36''
|-
|residual_travel
|false
|''For truck and trailers.'' When true, the axle can be lifted. Each array member corresponds to an axle, from front to back (or from back to front in the case of trailers). ''Trailer functionality is added in ETS2 1.27/ATS 1.6.''
|-
|steerable_axle
|array<bool>
|see description
|''For truck and trailers.'' When true, the axle will be steerable. Each array member corresponds to an axle, from front to back (or from back to front in the case of trailers). By default, all wheel_f axles on trucks are ''true'', while all others are ''false''. ''Added in 1.31.''
|-
|weight_distribution
*spreader (removes the pitch degree of freedom, typical of a spreader/booster/stinger on a lowboy configuration)
''Added in ATS 1.6.2''
|-
|cog_cargo_mass_min
|float
|0
|Lowest cargo mass at which to offset the center of gravity. ''Added in 1.35.''
|-
|cog_cargo_mass_max
|float
|20000
|Highest cargo mass at which to offset the center of gravity. ''Added in 1.35.''
|-
|cog_cargo_offset_min
|float3
|(0,0,0)
|Distance to offset the center of gravity at '''cog_cargo_mass_min'''. ''Added in 1.35.''
|-
|cog_cargo_offset_max
|float3
|(0,1,0)
|Distance to offset the center of gravity at '''cog_cargo_mass_max'''. ''Added in 1.35.''
|}
