309
edits
Changes
→Special Animations
==Interior Animations==
===Special Animations===
|gadget_anim
|
|0→1 is a full animation cycle<br />(animation will be played as a continuous loop)|This animation is played in a loop while the truck's ignition/electricity is on.
|}
|
|
|-
|differential_lock_stick_anim
|Differential lock switch/control
|0 - disengaged<br />1 - engaged
|''Added in ETS2 1.27/ATS 1.6''
|}
===Gauge animations===
This set of animations handles analog gauges. The related '''*_min''' and '''*_max''' attributes set the values that the start and end of the animation correspond to. Where the simulated value exceeds the min/max attribute, the animation is clamped.
{{Note|All '''*_psi_*''' attributes have been renamed to '''*_pressure_*''' as of ETS2 1.27/ATS 1.6. This is to reflect the change to ''bar'' (atmospheres) as the working pressure unit instead of ''psi''.}}
{| class="wikitable"
!Attribute Name
!Notes
|-
|oil_psi_animoil_pressure_anim|Engine oil pressure in pounds per square inch (psibar)|0 - oil_psi_anim_minoil_pressure_anim_min1 - oil_psi_anim_maxoil_pressure_anim_max|403-6 bars (43.5-90 87 psi ) is typical working value
|-
|water_temp_anim
|-
|battery_anim
|Battery potential in volts(V)
|0 - battery_anim_min
1 - battery_anim_max
|1mph = 1.60934km/h
|-
|air_psi_animair_pressure_anim|Air brake reservoir pressure in psi (pounds per square inchbar)|0 - air_psi_anim_minair_pressure_anim_min1 - air_psi_anim_maxair_pressure_anim_max|working value 140 psi
|-
|brake_psi_animbrake_pressure_anim|Air brake application(bar)|0 - brake_pressure_anim_min1 - brake_pressure_anim_max||-|general_air_press_anim|General air supply (bar)|0 - general_air_press_anim_min1 - general_air_press_anim_max||-|trailer_air_press_anim|Trailer air supply (bar)|0 - trailer_air_press_anim_min1 - trailer_air_press_anim_max
|
|-
|suspension_load_anim
|Suspension load in (newtons)
|0 - suspension_load_anim_min
1 - suspension_load_anim_max
|clock_big_anim
|Analog clock, minute hand (0-60)
|0 - clock_big_anim_min (default 0)1 - clock_big_anim_max (default 60)
|
|-
|clock_small_anim
|Analog clock, hour hand (0-12)
|0 - clock_small_anim_min (default 0)1 - clock_small_anim_max (default 24)
|
|-
|generic_anim
|Animation for other gauges.
|0 when truck is turned off<br />1 when truck is turned on
|
|}
===Indicator animations===
These animations are not interpolated from 0 to 1 rather . Instead they have only 2 states: switched off (0) and switched on. So this (1), so these animations should have only 2 key frames. All indicator animations are triggered during the start-up electrical check, as well as for their particular functions.
==Dashboards IDs==
* 1020 - current speed
* 1030 - odometer, needs space for at least six digits
* 1040 - current gear, uses N, DA[number], R or R[number] for automatic and N, [number], R or R[number] for maualmanual or sequential
* 1050 - current clock time in proper format, eg. "12:34 pm"
* 1060 - remaining fuel in tank
* 1070 - ui::text for fuel bar, the text is cut left-to-right according to current fuel tank state
* 1075 - ui::text that defines size, orientation and range of fuel bar(typical data "H~~0~~1", horizontal range 0 to 1)
* 1080 - guessed operating range of vehicle
* 1090 - water temperature
* 1100 - cruise control speed value
* 1110 - ui::text for oil pressure bar, the text is cut according to current oil pressure
* 1115 - ui::text that defines size, orientation and range of oil pressure bar (typical data "H~~0~~1168", horizontal range 0psi 0bar to 8bar (116psi (8bar))
* 1120 - ui::text for air pressure bar, the text is cut according to current air pressure
* 1125 - ui::text that defines size, orientation and range of air pressure bar (typical data "H~~0~~17412", horizontal range 0psi 0bar to 12bar (174psi (12bar))
* 1130 - ui::text for turbo pressure bar, the text is cut according to current oil pressure
* 1135 - ui::text that defines size, orientation and range of turbo pressure bar (typical data "H~~0~~1", horizontal range 0 to 1)
* 1140 - ui::text for adblue bar, the text is cut according to current adblue tank state
* 1145 - ui::text that defines size, orientation and range of adblue bar(typical data "H~~0~~1", horizontal range 0 to 1)
* 1150 - ui::text for water temperature bar, the text is cut according to current water temperature
* 1155 - ui::text that defines size, orientation and range of water temperature bar (typical data "H~~0~~130", horizontal range 0*C to 130*C)
* 1240 - cruise control icon, can be ui::group or ui::text or any other element that could show/hide. Cruise control speed ( 1100) explicitly CAN be child of this group.
* 1250 - cruise control memory icon, can be ui::group or ui::text or any other element that could show/hide.
* 1260 - low air pressure warning icon
* 1270 - parking brake indicator icon
* 1280 - engine running time
* 1290 - retarder icon
* 1300 - transmission gear (raw, without mode info)
* 1310 - transmission mode (without gear info)
Data for bars are entered in format "H~~0~~130", H means the bar is horizontal (or V for vertical), leftmost position represents value 0, rightmost position represents value 130. Empty text defaults to "H~~0~~1".