Documentation/Engine/Sound/TruckTransmission
Contents
Sounds - The truck transmission and the retarder
The next group of the sounds of the truck are sounds of the transmission and the retarder.
Retarder
Event "retarder" plays sound of the retarder. It has to be 3D event. The event should be routed to the "truck_effects" audio bus.
The event must be looped and following event parameters must exist:
- retarder - the value is in the range <0 - 1> and represents the retarder activity
- trans_rpm - the value is in the range <0 - 3000> and represents the rpm of the transmission
Gear grind
Sound of grinding of the transmission gears. It has to be 3D event. The event should be routed to the "truck_effects" audio bus.
The event must be looped. There are no parameters.
Gear wrong
Sound effect of incorrect gearbox engagement. It has to be 3D event. The event should be routed to the "truck_effects" audio bus.
This is a simple ("one shot") event.
Sound Configuration
The group of sounds configuration is stored in the "accessory_transmission_data" data.
There is no mandatory events but there is no default events either. Only the defined sounds will be played. There is array "sounds" which contents specification for the events:
- retarder
- gear_grind
- gear_wrong
Example
There are configuration files for transmissions for the "Peterbilt 579" inside folder "/def/vehicle/truck/peterbilt.579/transmission".
Each accessory include @include "sound.sui" file which contents indirect definition of the events:
sounds: 3 sounds[]: "retarder|/sound/truck/default/retarder.soundref" sounds[]: "gear_grind|/sound/truck/default/effects_gear_grind.soundref" sounds[]: "gear_wrong|/sound/truck/default/effects_gear_wrong.soundref"
Sound Position
The 3D position of this sounds is (by default) the same position as the engine.
This position could be modified by the .soundref file. (see Sound reference file)